During our Thanks Giving break from kid programs, I decided to refinish our dated cabinets. It's a process but totally worth the work.
It's really not a hard project to take on. Simply sand down the surface area of the cabinet, apply 1 coat of stain, let it dry, apply second coat and then polyurethane after the 2nd coat dries. It's just a time consuming project. But there is a definite end in site. You only have so many cabinets ;) With three kids under 5, I try to do a little at a time during their down time. It will take longer to complete but that strategy keeps me stress free and involved with them throughout the day.
Okay- I stand corrected. It is a hard project to take on. Still in the works. Now, I'll need to give more instruction. I had several trials and errors I'd like to share. More to come.
The important thing about sanding is to go with the grain of wood. Just look at the surface and see which way the wood is running. I used a fine surface preparation sand to prepare the surface. It took off the previous finish without leaving apparent scratch marks. Here's the brand I used but you can use any that says Fine Surface Preperation
Use a good quality brush that is specific to staining. It should cost between $10-$15 don't be cheap on this purchase it does make a difference. Prior to staining, make sure you wipe all sanding residue off the surface area. I used baby wipes. A household essential! On your first coat of stain, apply stain and brush strokes with the grain of wood. To remove the excess stain, dab the brush against some paper towels to remove the excess. Keep applying the same strokes with the grain of wood, dabbing each time. Eventually, you will see that the stain has absorbed and you get the wood finish look. Let dry completely at least 2 to 3 days. Your second coat will be the exact same process but you have to be quick on this one. If you let the stain sink in too long it will start to cake a little. I found that its best to apply more on the second coat and work quickly to take it off with the brush and paper dowel dabbing technique. More to come!
This is an example of how the second coat will cake if you don't apply enough stain at the start of that second coat. The brush starts to remove stain from the First coat. I'll have to re-sand and re-stain this one. This is why I started the dabbing technique to create a marble look. I was afraid of getting this result. Once I figured out how to apply the second coat, they started to look great!
You also want to make sure you brush out any black spots. These happened more during the second coat of stain. I skipped the step of sanding between coats. I think this is a result of that. If you want to add that step, test it out on one first. There is a special sand paper for in-between stain coats. Mine came out fine but I had to make sure I brushed the black spots out.
Avoid a third coat of stain. Not sure if this happens with other brands of stain but with this Miniwax (stain, penetrate and seal), the third coat gives a glossy look. Almost as if you tried to paint it instead of stain it. I tried to touch up one area on this cabinet with the 3rd coat and completely ruined it. Now I'll have to sand down and re-stain. The 3rd coat will ruin your project.
This was my system for applying the stain each time. I dipped the brush into the stain and made short strokes along the entire area so that I didn't have one spot with too much stain on it. After the short strokes, I increased the length of each stroke until the stain covered the entire surface. Next I starting dabbing the brush against paper towels after each stroke to remove the excess on the surface and the excess from the brush.
This is the one I used because it didn't wipe off the stain. Some will remove the stain. I also chose clear satin because I personally didn't want a glossy look. This does come in gloss if that's what you like. Note that this is water based. The best part of this process is that it dries within minutes. I applied 2 coats. The second coat after the first dried. Make sure you continue with brushing along the grain of the wood and that you don't leave any puddles. Make sure to pick up a brush that is for polyurethanes for this step. Keep it clean in between paint jobs. The brush needs to stay soft.
I strung these jingle bells up and hung them along our window. The kids really took to them. I used this activity during our Indian Village week but plan to do it again for our santa's workshop week.
I'll post more of our recipes here over time but here's one of our favorites. Hubby approves too ;)
1lb ground beef
1 small can of Tomato Paste
2 teaspoons of worcestershire sauce
Half an onion
2 -3 cloves of garlic
salt and pepper to taste
Brown the beef in a saucepan and drain grease
Finely dice onion and garlic and sauté in 1 tablespoon of olive oil
Add onion and garlic to drained beef
Add 1 Cup of water to beef mixture, the can of tomato paste, worcestershire sauce and salt/pepper. Bring to a boil. Reduce heat to low
The bathroom has become my sanctuary. A place where I have a brief moment to myself. I actually sigh with relief as I close the door. Truth is, I don't even go potty. As much as I love spending time with the kids, it's nice to get a few moments away. I say a few moments because that's my current reality. They're so young and it's tough at this age. Tough now but I don't wish the days away. They only have one childhood, my second one to live. I try to remember that when they are all needing me at once. Even though I know I do a lot with them, I still feel like I should be doing more. I'm sure this is a syndrome all parents experience. Love is the most important thing you can give. The best part is that love is an offering we can all give despite our financial status or creative abilities. They are loved. And I am loved. As for the break... I consider it a recharge moment for me to give back all the more.
Save your next carton for this fun activity. It keeps my 1yr old, 3 yr old and 4 yr old busy. I really can't explain why but it does work and is a must try. All you need is a carton like this and craft sticks. It's best suited for younger toddlers but the older ones enjoy it too.
This is a great one! The kids really get into it. We call it Shaka Shaka art.
During a recent hike with the kids, I had them collect items from the trail so we could make fossil imprints when we got home. The recipe I tried really wasn't good (2 cups flour, 1/2 cup salt and 3/4 water). I'd love to try this again but with a better recipe. The hunt is on! If you have a recipe, please share :)
For Our Indian Theme this week, I made the kids a canoe and created this fun oar to go with it. I filled the oar with corn so it would make sounds when they rowed the canoe.
This is a fun and easy activity to set up for the kids during the fall. We used punching balloons and a turkey image found on the web to create ours.
We covered ours in red and had the kids place red fire ambers inside. The fire explodes with ambers when turned on. We used tissue paper because it was light enough to take air. I wanted the fire as a prop and activity for our Indian Village Theme this week.